Payment & Shipping Terms:
|Internal Size:||14000×12000×6350 Mm (L×W×H)||Control Panel:||Schneider Components|
|Lights:||LED Lights||Door:||With Hanger Rail|
|Exhaust Filter:||Carbon Filter||Usage:||Air Craft|
High Precision Air Craft Industrial Spray Systems , Dry Paint Booth Eco Friendly
1, Centrifugal fan for intake and extraction.
2. All panels are tongue and groove interlock structure.
3, #304 stainless steel heat exchanger.
4, All LED lights, energy save and more illumination.
5, Color white, blue, orange and red is optional.
6, OEM available.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean, symmetrical and steady-going down airflow for spraying. After painting, inside the drying oven, hot air goes from heating generators to plenum, then enters room after filtered by ceiling filter, hot air circulation providing heat that is necessary for baking of air craft surface. .
Spray booth specification:
|Inside dimension||14000×12000×6350 mm (L×W×H)|
|Outside dimension||14150×13920×7030 mm (L×W×H)|
|Front door||Folding door, 1 set, 12 folds, door size: 10200×6000 mm (W×H), square tube frame, colour: white|
|Emergency door||2 units, 800×2000mm (W×H), colour: white.|
|Basement||Without, exhaust from both 4 lines pits under ground, each line 11500×760mm(L×W), with grilles above.|
|Wall panel||Thickness: 70mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with 70mm thick EPS inside, EPS/14kg/m³, colour: white.|
|Light||Ceiling Lights: 24Units×4Pcs=96Pcs×36W, side Lights: 26Units×2Pcs=52Pcs×36W, up and down setting, with LED, lighting boxes are powered coated.|
|Generator cabinet||Inlet from side upper, outlet from back upper, square tube frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle.|
|Intake and Exhaust system||Inlet: 6×5.5KW centrifugal fan, power: 5.5KW for each, air capacity: 90000m3/h.|
|Outlet: 3×11KW centrifugal fan, belt drive, power: 11KW for each, air capacity: 90000m3/h. with manual damper, 12pcs ducts, 6pcs 90 degree bend, 3pcs 30 degree bend.|
|Heating system||RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper for spraying cucle, Max. heating productivity: 200000kcal/h for each set, maximum temperature: 80 degree, total 12pcs chimney, 3pcs bend.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter, carbon filter.|
|Roof||50mm EPS panel.|
|Control system||Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature controller, schneider components.|
|Total power||72KW (Power supply 3*380V, 50HZ)|
Contact Person: Allan