Payment & Shipping Terms:
|Fan:||Turbo Fan||Light:||Ceiling Light Only|
|Draft:||Rear Side Draft||Usage:||Saloon Car, SUV|
|Installation:||Mount On The Concrete Floor||Filtering System:||Ceiling Filter, Fibreglass Filter|
Professional Spray Paint Station With Ceiling Filter / Fibreglass Filter
Prepation bay special for the job before painting, under coat, base coat, top coat, and sanding, polishing will be made in the station, intake provide the fresh air, and exhaust extract the duct out.
1. Each unit with one 5.5kw fan for intake and exhaust.
2. Quality brand turbo fans, directly drive type.
3. Heating system option.
4. Rear side draft air flow.
5, Continue line with rail on floor option.
6, Led light and Scheider electric components.
7, Moveable infrared on the ceiling option.
8, Different job in different position at the same time.
9, PVC curtain between the stations.
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, down air flow comes out, and extraction from rear side directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
Below for one unit only:
|Inside dimension||6300×3450×2650 mm (L×W×H)|
|Outside dimension||7550×3550×3100mm (L×W×H)|
|Plenum dimension||6300×3450×450 mm (L×W×H)|
|Room body||Back side EPS wall panel, the other sides PVC curtain.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.|
|Generator cabinet||Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter.|
|Control system||Fan switch, lighting switch, emergency stop.|
|Installs way||Hooked from roof by steel cable or supported by steel column.|
|Total power||6.7KW (Power supply 1×220V, 3×380V, 50HZ)|
Contact Person: Allan