Payment & Shipping Terms:
|Heating:||Riello Diesel Burner G20||Pressure:||With Pressure Protect Device|
|Intake Motor:||1X7.5kw Turbo Fan||Light:||LED Lights|
|Wall:||Rock Wool||Air Flow:||Converter Control|
High Precision Waterborne Spray Booth Equipment Industrial Full Grilles Floor
1. Spray booth with diesel burner heating.
2. All panels are tongue and groove interlock structure
3. Pressure device inside the control panel.
4. Quality brand-name turbo fan fans
5. Water base paint system on the ceiling.
6. Spray booth specific, dual voltage LED light fixtures
7. With converter to adjust the air flow.
8. Full grilles on the floor.
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying. After painting, the diesel burner heating with hot air circulation, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.
|Inside dimension||6900×3900×2650 mm (L×W×H)|
|Outside dimension||7000×5450×3400mm (L×W×H)|
|Front door||Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.|
|Emergency door||1 units, 800×2000mm (W×H), colour: white.|
|Basement||Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour.|
|Wall panel||Thickness: 50mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with rock wool inside, colour: white, bulge structure.|
|Light||Ceiling Lights option, side lights: 8Units×4Pcs=32Pcs×16W, with LED, lighting boxes are powered coated, illumination ≥1500LUX|
|Generator cabinet||Intake from back upper, exhaust from rear upper, aluminum alloy frame; orange machine-made panel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.|
|Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 5m ducts, 1 pcs 900 bend, 1 pcs 300 bend, 1 pcs intake hoop. with converter.|
|Heating system||RIELLO G20 diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 200000kcal/h, max temperature: 80℃, 4pcs chimney, 1 pcs bend.|
|Purification system||Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)|
|Roof||Galvanized steel, with water base paint system on the ceiling.|
|Control system||Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter, temperature limit controller, pressure gaugen, with pressure protect device, all motors is normal start.|
|Total power||18.5KW (Power supply 1×220V, 3×380V, 50HZ)|
Contact Person: Allan