Payment & Shipping Terms:
|Draft:||Full Down Draft||Heating:||Option|
|Usage:||Car, Vehicle, Saloon Car||Application:||Putty, Base Coat Sanding|
Customized Spray Bake Booth Paint Preparation Station , Clean Shop Prep Station
1. 5.5kw fan for intake and exhaust.
2. Quality brand turbo fans, directly drive type.
3. Diesel burner heating system option.
4. Down draft air flow from steel basement.
5, Continue line with rail on floor option.
6, Led light and Scheider electric components.
7, Moveable infrared on the ceiling option.
8, PVC curtain different color option.
9, Full grilles on the floor.
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, down air flow comes out, and extraction from steel basement directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. Mount on the concrete floor, easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
|Inside dimension||6300×3450×2650 mm (L×W×H)|
|Outside dimension||7550×3550×3100mm (L×W×H)|
|Plenum dimension||6300×3450×450 mm (L×W×H)|
|Steel basement||Steel basement, 300mm high, in the ground, full grilles, twisted steel grilles, painted, no ramps.|
|Room body||Back side 50mm EPS wall panel, the other sides PVC curtain.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.|
|Generator cabinet||Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter.|
|Control system||Fan switch, lighting switch, emergency stop.|
|Installs way||Hooked from roof by steel cable or supported by steel column.|
|Total power||6.7KW (Power supply 1×220V, 3×380V, 50HZ)|
Contact Person: Allan