Payment & Shipping Terms:
|Heating:||Moveable Infrared||Control Box:||Schneider Components|
|Intake Motor:||2X4kw Centrifugal Fan||Exhaust Motor:||1X7.5kw Centrifugal Fan|
|Usage:||Car, Vehicle, SUV||Illumination:||LED|
Custom Mobile Infrared Industrial Spray Booth Coating 7500X4500X3300 mm ID
1. Infrared spray booth, with diesel burner as well.
2. All panels are tongue and groove interlock structure
3. Moveable infrared on the ceiling.
4. Quality brand-name centrifugal fans
5. Industry-leading light levels
6. Spray booth specific, dual voltage LED light fixtures
7. Booths include installation instructions, fan, motor and drive, fasteners, hardware, and sealant necessary for assembly
In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean, symmetrical and steady-going down airflow for spraying,After painting, the infrared heating or diesel burner heating to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.
|Inside dimension||7500×4500×3300 mm (L×W×H)|
|Outside dimension||8950×4600×3750 mm (L×W×H)|
|Front door||Folding door, 3 folds, 3000x2800mm(WxH), without frame cover, colour: White.|
|Emergency door||1 units, 650×1800mm (W×H), colour: white.|
|Basement||Concrete basement, 900mm high, with adjustable bolts, full grilles made by flat bar and twisted steel, galvanized. Exhaust from pit of the middle.|
|Wall panel||Thickness: 50mm, width: 1150mm, tongue and groove structure, 0.376mm colour steel with polystyrene(EPS) insulation inside, colour: white.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, Side lights: 8Unitx4Pcs=32Pcsx36W, vertical setting, with electronic ballasts, lighting boxes are powered coated. Illuminate: ≥1000LUX.|
|Generator cabinet||Intake from side upper, exhaust from back upper, quadrate steel frame; white coated steel covered, filled with heat preservation material inside|
|Intake and Exhaust system||Inlet:2×4KW double-intake centrifugal fan, air capacity: 25000m 3/h.|
|Outlet: 1x7.5KW double-intake centrifugal fan, air capacity: 21000m
3/h. 6m straight tube, 1 elbow, 6m chimney tube.
|Heating system||RIELLO G20 diesel burner, stainless steel heat exchanger, electric damper actuates from spraying to baking cycle.Max heating productivity: 200000Kcal/h, Max temperature: 80℃. Roof top with one unit removable infrared lamp, 1KW/unit, total 3KW.|
|Purification system||Pre-filter, ceiling filter, exhaust fiberglass filter, activated carbon filter|
|Control system||Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,
thermostat, power supply switch, emergency stop, temperature limit controller, all motors are normal start.
|Total power||21KW (Power supply 1×220V, 3×380V, 50HZ)
Contact Person: Allan