Payment & Shipping Terms:
|Recovery:||With Recuperation System||Fan:||Belt Drive Type|
|Air Flow:||Manual Damper Control||Heating:||Riello G20 Diesel Burner|
|Control Box:||Schneider Components||Usage:||SUV, Saloon Car.|
prep station spray booth,
automotive prep station
Heat Recuperator System Paint Prep Station Diesel Burner Heating Eco Friendly
1. With heat recuperation system, energy save and more efficiency.
2. Four sides with PVC curtain.
3. Quality brand name centrifugal fans, belt drive type
4. Riello G20 diesel burner with a heating productivity of 200000Kcal/h
5. Pneumatic damper for spraying to baking cycle.
6. Air group on the roof.
7. Exhaust from the central pits.
8. Electric damper for intake and exhaust, control the air flow.
In Sanding precess, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,
symmetrical and steady-going down airflow for spraying. After sanding and painting, hot air goes from heating generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. In the meantime, heat recuperation system start working,energy save and temperature raise fast.
|Basement||No, mount on the floor, exhaust from the center big pit, size 3000×4600mm(W×L)|
|Wall Panels||No wall panel, four edge with PVC curtain, color: yellow+transparent+yellow|
|Illumination||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with electronic ballasts, lighting boxes are powered coated.|
|Generator cabinet||On the top, intake from back upper, exhaust from back upper, quadrate steel frame; white coated steel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||Inlet: 1×5.5KW centrifugal fan, belt drive, model: TAE-400H, air capacity for each fan: 18000m3/h.|
|Outlet: 1×5.5KW centrifugal fan, belt drive, model: TAE-400H, air capacity for each fan: 18000m3/h, with manual damper.|
|Heating system||Diesel burner G20, stainless steel heat exchanger, maximum heating productive 200000Kcal/h, with heat recuperator, and pipe as for spare part to change the aluminum core plate in the summer.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter, pocket filter|
|Control system||Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature limiter, baking time start from the temperature up to the setting value.|
|Total Power||13KW (3×380V, 50HZ)|
|Note||2 units connect, hook from the roof, client make the platform for the air group,|