Payment & Shipping Terms:
|Fan:||Turbo Fan||Light:||Ceiling Light Only|
|Draft:||Full Down Draft||Purpose:||Putty, Primer, Base Coat And Top Coat|
|Extraction:||From The Steel Basement||Usage:||Vehicle|
prep station spray booth,
auto body prep station
LED Lights Turbo Fan Custom Paint Prep Station , Auto Body Prep Station
Bright full booth illumination is provided by eight (8) four-tube, LED light fixtures in the ceiling panels. Each is sealed behind clear tempered safety glass. All fixtures are made by China and approved for their intended use and placement.
1. No intake system, exhaust only.
2. Quality brand name turbo fans, directly drive type
3. No heating system.
4. Full down draft air flow.
5. Steel basement with full grilles.
Prep station used for making base coat, top coat, sanding and small painting, outside fresh air comes into the booth through the ceiling filter system, from the plenum, full down air flow comes out, and extraction from full grilles directly through fibreglass filter and carbon filter, the air flow can be control by electric damper. easy for installation and maintenance, the most importance things is the cost very low, highly cost effective.
|Inside dimension||6300×3450×2650 mm (L×W×H)|
|Outside dimension||7550×3550×3100mm (L×W×H)|
|Plenum dimension||6300×3450×450 mm (L×W×H)|
|Steel basement||Steel basement, 300mm high, full grilles, twisted steel grilles, painted, 2 ramps, size of each: 2000×750mm(L×W)|
|Room body||Back side 50mm EPS wall panel, the other sides PVC curtain.|
|Light||Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.|
|Generator cabinet||Exhaust from back side, galvanized steel frame; white machine-made panel covered, filled with heat preservation material inside.|
|Intake and Exhaust system||1×5.5KW turbo fan, air capacity: 18000m3/h, with electric damper.|
|Purification system||Pre-filter, ceiling filter, fibreglass filter.|
|Control system||Fan switch, lighting switch, emergency stop.|
|Installs way||Hooked from roof by steel cable or supported by steel column.|
|Total power||6.7KW (Power supply 1×220V, 3×380V, 50HZ)|